Computerized

15 Points Per Correct Answer - No time limit  

1. You can find DIN 5 connectors where? AT keyboards On parallel ports On serial ports SCSI ports

2. What is the largest partition size supported by native DOS running FAT16? 4GB 500MB 2GB 2TB

3. What is the device installed in a users workstation that allows them to connect to the Network? Network interface card(nic) Network access card Media access card Hub

4. What cleaning products will clean a mouse,pick two from the list? Ammonia and water Denatured alcohol and water Windex and soapy water Soapy water and Isopropyl alcohol

5. How do you disable the floppy disk drive in the bios setup program? Set the floppy disk drive to something other than the actual type of drive installed Set the primary floppy disk drive to disabled Set the floppy disk drive to none You cannot disable the floppy disk drive in bios setup;you must use OS to do this

6. What is the physical difference between a SIMM and DIMM? A SIMM has one slot on the bottom, whereas a DIMM has two slots on the bottom A SIMM has 45 pins, whereas a DIMM has 72 pins A SIMM has 72 pins, whereas a DIMM has 168 pins A SIMM has two rows of 45 pins, whereas a DIMM has one row of 168 pins

7. The upper memory area (UMA) ranges from? 640KB to 792KB 0 to 1024KB 0 to 640KB 640KB to 1024KB

8. Which is not a type of parallel printer port? EPP PPL ECP Bi directional

9. What is the standard interrupt and memory address for COM2? 3 and 03F8 4 and 03F8 2 and 02F8 3 and 02F8

10. Which method will cause a POST? A cold boot Use ctrl-alt-del A warm boot Hold down shift key