Computerized

15 Points Per Correct Answer - No time limit  

1. You can find DIN 5 connectors where? SCSI ports On serial ports AT keyboards On parallel ports

2. What is the largest partition size supported by native DOS running FAT16? 4GB 500MB 2GB 2TB

3. What is the device installed in a users workstation that allows them to connect to the Network? Network interface card(nic) Network access card Media access card Hub

4. What cleaning products will clean a mouse,pick two from the list? Denatured alcohol and water Ammonia and water Soapy water and Isopropyl alcohol Windex and soapy water

5. How do you disable the floppy disk drive in the bios setup program? Set the primary floppy disk drive to disabled Set the floppy disk drive to something other than the actual type of drive installed You cannot disable the floppy disk drive in bios setup;you must use OS to do this Set the floppy disk drive to none

6. What is the physical difference between a SIMM and DIMM? A SIMM has 72 pins, whereas a DIMM has 168 pins A SIMM has two rows of 45 pins, whereas a DIMM has one row of 168 pins A SIMM has 45 pins, whereas a DIMM has 72 pins A SIMM has one slot on the bottom, whereas a DIMM has two slots on the bottom

7. The upper memory area (UMA) ranges from? 0 to 1024KB 640KB to 792KB 640KB to 1024KB 0 to 640KB

8. Which is not a type of parallel printer port? EPP PPL ECP Bi directional

9. What is the standard interrupt and memory address for COM2? 4 and 03F8 3 and 03F8 3 and 02F8 2 and 02F8

10. Which method will cause a POST? A warm boot A cold boot Use ctrl-alt-del Hold down shift key