Basic Electrical Circuit Analysis I

15 Points Per Correct Answer - No time limit  

1. Which of the following prefixes represents 10 raised to the power of -15? atto(a) deci(d) pico(p) femto(f)

2. Which of the following is a representation of an electronic charge? 2 amperes(A) 60 watts(W) 10 volts(V) 3000 microcoulombs(C)

3. Which one of the following is an active element? 15 kOhm resistor 10 mH inductor 25 pF capacitor 10 V power supply

4. Which one of the following could be used to represent the units of conductance(G)? All of these Siemens Mho Inverted Greek letter Omega

5. What law is described by the following equation: Voltage(v) = Current(i) x Resistance(R). Law of Superposition Kirchhoff's Voltage Law Ohm's Law Kirchhoff's Current Law

6. Which one of the following equations could be used to calculate the power absorbed by a resistor? Power(p) = Voltage(v) x Current(i) All of these Power(p) = Voltage squared(v²) / Resistance(R) Power(p) = Current squared(i²) x Resistance(R)

7. If three resistors, R1=50.0 kOhm, R2=50.0 kOhm and R3=25.0 kOhm, are placed in parallel, what resistor (Re) could be used to represent an equivalent resistance? 25.0 kOhm 12.5 kOhm 125.0 kOhm 41.7 kOhm

8. If three resistors, R1=50.0 kOhm, R2=50.0 kOhm and R3=25.0 kOhm, are placed in series, what resistor (Re) could be used to represent an equivalent resistance? 41.7 kOhm 125.0 kOhm 50.0 kOhm 12.5 kOhm

9. What law is used when evaluating a circuit using the Node Voltage method? Law of Superposition Volta's Law Kirchhoff's Voltage Law Kirchhoff's Current Law

10. What is the method of analyzing a circuit containing multiple independent sources by activating one source at a time? Superposition Norton Equivalence Thevenin Equivalence Source Transformation